|
If you are still fond of your passive loudspeakers and you need a very compact mixer which can supply very high power, our M500USB is what you are looking for. Featuring the same sophisticated mixer section and the same 24-bit effect of the M8USB, this active mixer is equipped with a powerful 250W-per-channel amplifier featuring NEUTRIK SPEAKON connectors for the power outputs. Perfect operation is guaranteed by a thorough protection system and by a variable-speed fan for optimum cooling of the output stages. The M500USB also features an interface for PC connection, adapters for rack mount and includes a sturdy bag for transportation.
Datasheet |
| System type : |
8 inputs powered mixer with digital effects & USB |
| Power Supply : |
230VAC 50/60Hz or 117VAC 50/60Hz |
| Phantom power : |
+ 48 V all mono input |
| Output Power (THD<1% 1kHz) Stereo 4+4ohm : |
250 W + 250 W RMS |
| Input Connectors : |
Mic Input Balanced XLR-F - Combo
Line Input Balanced TRS Jack
USB |
| Inputs : |
6 MIC - 4 Line - 2 stereo line - USB |
| Input Sensitivity : |
Mic Input from 0 to -60 dB
Line Input from +20 to -40 dB |
| Input Impedance : |
Mic Input 2 Kohm
Line Input 10 Kohm |
| Output Connectors : |
Balanced TRS Jack and / or XLR-M - USB |
| Outputs : |
C\ROOM - MAIN MIX - ALT 3-4 - AUX 1 & 2 - PHONES - USB |
| Amplifier Output : |
2 x SPEAKON |
| Output Levels : |
MAIN MIX nom. out level +4 dBu - all other outputs 0 dBu - Maximum level all outputs +22 dBu |
| Headphones output impedance : |
min. impedance 32 ohm - max. out level (2x) 193 mW |
| Distortion (THD+N) : |
at +4dB, 1kHz < 0,008 % |
| Mono Input channel equalization : |
Lo Cut 75 Hz, 18 dB/oct.
HIGH (shelving) ±15 dB @ 12KHz
MID (peaking) ±15 dB @ 2.5KHz
LOW (shelving) ±15 dB @ 80Hz |
| Stereo Input Channel Equalization : |
HIGH (shelving) ±15 dB @ 12KHz
MID (peaking) ±15 dB @ 2.5KHz
LOW (shelving) ±15 dB @ 80Hz |
| Incorporated effects : |
HALL, ROOM, VOCAL and PLATE reverbs,
MONO, STEREO and TAP DELAY,
CHORUS and FLANGER,
REV + DELAY, REV + CHORUS and REV + FLANGER
16 step PRESET selector
16 step VARIATION selector
PEAK LED
MUTE and TAP DELAY switch
with LED indicator and footswitch |
| Damping Factor : |
>300 @ 4 ohm |
| Maximum Power Consumption : |
400VA |
| Frequency response : |
20Hz - 20kHz (+/- 0.5dB) |
| Noise : |
unweighted < -93 dBu |
| Protections : |
DC voltage, short circuit, thermal, soft start |
| Cooling : |
variabile speed DC fan |
| Weight : |
5.7 kg(12.568lb ) |
| Dimensions (W x H x D) : |
28 x 12.5 x 35.2 cm |
| Notes : |
Carrying bag and 19” rack adapters included |