A nine band graphic equaliser can be switched between the LR outputs or the two monitor channels to shape the sound. This can also be switched off to compare the tonal effect with the unregulated sound. Beside the stereo LR master is a regulated mono output with a switchable Lo-pass filter allowing you to feed a sub-woofer without the need of a separate crossover. Naturally there is also an obligatory controllable headphone output, as well as two RCA phono sockets with volume control for recording purposes.
Besides individual Mute and PFL/AFL monitor functions, all with LEDs, for each channel, there is also a Standby switch which mutes the complete console except for the Tape/CD inputs.
This allows music to run during live performance breaks.
The integrated stereo power amplifier delivers 2 x 800W into 4Ohms and 2 x 500W into 8Ohms. The amplifier has a Class H configuration to improve its efficiency and reduce its operating temperature. The outputs are connected using Speakon sockets to the loudspeakers. Using a simple routing arrangement, the amplifiers can be internally connected to the two monitor signal paths or the main LR outputs, combined with other routing possibilities using the jack inserts. All relevant outputs are semi-balanced with a floating ground using TRS jacks. The amplifier can be fed from an external source using the switchable jack sockets (inserts) over its own volume controls. The master section also has insert sockets for use with external effect units. Signal paths can be monitored utilising the 2 x 12 point LED strip. The stereo amplifier inputs also have separate Signal and Clip LEDs.
Features:
· Portable with carrying handle, or 19" rack mounted using provided rack ears.
· 539mm x 539mm x 178mm
· Weight: 25.3kg
· Rack 484mm x 446mm x 178mm
· Built-in BNC socket for 12V lamp
Inputs:
· 1–8 MIC IN XLR balanced, 2k ohm -63 to +5dBu / LINE IN Jack balanced >30k ohm -25 to +10dBu
· 9 – 12 ST 9,10 L,R Jack unbalanced >10k ohm -10dBu max
· ST 11,12 L,R Jack unbalanced >10k ohm -10dBu max
· 2-TRK Tape RCA phono unbal. >10k ohm 0dBu
· EXT FX, AUX, LR Jack unbalanced >10k ohm 0dBu
· A,B AMP Jack unbalanced >10k ohm 0dBu
· Controls: Gain, 3 EQ, 2 pre-fade, 1 post fade, 1 pre/post switchable
- L,R Jack floating <75 ohm 0dBu MONO Jack floating <75 ohm 0dBu
- MON1, MON2, AUX, FX Jack floating <75 ohm 0dBu
- 2TRK Rec. OUT RCA phono unbal. <75 ohm 0dBu
- Master Inserts: L,R Jack unbalanced >75 Ohm 0dBu
- Headphones: Stereo jack Tip = L, Ring = R 30 to 300 ohm, 100 ohms recommended
- Speaker: Speakon Pin 1+, to Speaker positive, Pin 1- to speaker Minimum load: 4 ohms
Tech Spec:
- Nominal output level 0dBu (0.775 Volts rms)
- Frequency response: +/-1dB 20Hz to 20kHz
- Distortion: <0.006% THD+N 1kHz + 10dBu
- Crosstalk: <-90dB channel to channel 1kHz
- <-95dB Mute shutoff
- <-95dB Fader shutoff
- Channel HPF: 100Hz 12dB/octave
- Channel EQ: 3 band semi-parametric
- +/-15dB gain
- HF shelving 12kHz
- HM bell 350Hz to 7kHz
- LF shelving 60Hz
- Output EQ: 9 band graphic equalizer
- Mono Sub LPF: 100Hz 12dB/octave
- Faders: 100mm
- Digital Effects: 14 presets, parameter edit
Amplifiers
- Configuration: Class H bipolar
- Power output: 800W + 800W rms into 4 ohms
- 500W + 500W rms into 8 ohms
- Distortion: < 0.02% THD + N 1kHz
- Protection: Short circuit, overload, DC, thermal cut out
- Cooling: Thermally controlled fan
